Chimney Lining

One of the most important, and perhaps least understood part of a chimneys components is the flue lining. A flue lining of a chimney is defined as “A clay, ceramic, or metal conduit installed inside of a chimney, intended to contain the combustion products, direct them to the outside atmosphere, and protect the chimney walls from heat and corrosion.” ¬†Chimney Lining Installation pictures

Unlined Chimneys

A typical unlined chimney is a brick pillar, i.e. four brick walls. Unlined chimneys allow heat to move through brick chimney walls very quickly. During performance testing of chimneys, unlined chimneys performed so poorly that testing was abandoned. If the chimney flue is unlined, the liner can not perform its intended function. Since the early 1980s, fire code has stated that masonry chimneys shall be lined.

Clay Tile Lined Chimneys

The most common material used as a lining for masonry chimneys in new construction is terra-cotta clay flue tile. It is a relatively inexpensive and easily obtainable product. During performance testing of chimneys, clay flue tiles were easily damaged during the testing of thermal shock. All of the flue tile samples subjected to the heat shock test suffered damage in the form of cracking. Testing has also shown that clay tile does not crack from normal usage.

Thermal Shock and Liner Damage

Clay tile is a ceramic product and as such it cannot rapidly absorb and evenly distribute heat during rapid temperature rises in the chimney. A rapid temperature rise (as during a chimney fire) will cause the clay material to rise in temperature much more rapidly on the inside than on the outside of the tile. As the inside heats up, it will begin to expand very rapidly, much more rapidly than the cooler outside is expanding. This uneven heating produces an unequal expansion which in turn causes the flue tiles to crack and split apart. This is similar to immersing a cold drinking glass in very hot water. It will shatter instantly.

Thermal shock results only during periods of rapid temperature rise or fall. These conditions are met almost solely during what is known as a chimney fire, or when water is introduced during a fire, rapidly cooling the tile.

According to fire codes, if the flue liner in a chimney has cracked so that it no longer has the continued ability to contain the products of combustion ( i.e., heat, moisture, creosote and flue gases), it shall be removed and replaced, repaired, or relined with a listed liner system.

If the chimney has cracked flue tiles, the liner can not perform its intended function. Having a fire in the appliance, will heat up the flue tile and the cracks in the flue tile will expand creating gaps. The products of combustion can now go between the flue tile and the chimney structure where they can not be swept out. This may lead to the deterioration of the chimney structure. Cracked flue tile also become susceptible to falling out creating a blockage in the system.

Chimney Relining

The CHIMNEY Manns install stainless steel chimney lining systems UL Listed for wood, gas & oil insulated to “zero clearance”.

CHIMNEY Manns key tips:

  • When we install a liner for wood application we always insulate it to zero clearance.
  • A new liner will contain the products of combustion but heat transfer is as big an issue.
  • You can never be sure there is no house framing or combustibles touching the outside of the chimney walls. Fire safety code requires minimum 1″ clearance for outside chimneys and 2″ clearance for inside chimneys. That’s no wood touching the chimney from top to bottom!! This is the most violated code and difficult to inspect for. More house fire damage related to chimney fires is from heat transfer more so than flames going through the chimney walls. Zero clearance insulation means combustibles can be directly up against the outside of the chimney structure.
  • ¬†Whoever is installing your liner make sure you ask about zero clearance.
  • Pricing subject to liner size diameter, the length of the chimney, do the old tiles need to be removed, does scaffold need to be set up. Please call and schedule an evaluation for complete write up on the damage, recommendations and pricing.

Home Owners Insurance Note:

When flue tiles crack they do so because of a “sudden occurrence event”, the temperature on the outside and the inside of the flue tile reaches a 500 degree differential. This will only happen when the tile are heated up quickly as when there has been a chimney fire. Your home owners insurance may cover chimney fires (sudden occurrence event). We document our findings with pictures which can be submitted to your insurance company with our detailed write up.

Chimney Lining Installation pictures